Roller Doors New York

Roller Door Services New York

Roller doors in New York come in many different shapes, colors and designs and often get many different names such as rolling doors, rollup gates, overhead doors, storefront doors and more. Some use the roller shutters for commercial spaces in New York, like the commercial roller doors that can be found in warehouses, storefronts, parking lots, etc. And some use the roller doors for residential private homes such as the garage roller doors and the overhead roller doors. Doctor Gate can repair, service, maintain and install all types of roller doors in New York City. Whether it is a roller door greasing and lubricating, or roller door installation, the experts of Doctor Gate are ready for the task.

Roller door Troubleshooting New York

Before we will begin and elaborate about common roller doors malfunctions, and the ways to deal with the malfunctions, we first like to make safety warning that can save life, and that apply to all roll up doors and roller gates, whether it is a a roller door in queens New York, or roller door repair in Long Island: It doesn’t matter if it is a busted roller door for a private home near NYC, or industrial roller door near the Bronx, if your roller door or roller gate is busted, out of its tracks, if it is stuck half way down, or if the electric motor doesn’t move the gate, the best thing for you to do will be to get in touch with a nearby roller door vendor to fix it for you. Do not try and force the gate to move, and for sure do not try to repeatedly use the motor to move the roller door. Such attempts can result with bigger damage, and at the same time you may hurt yourself since roller doors – when misused – can become dangerous.

Why my roller door is stuck?

There may be many possible reasons why a roller door or a roller gate in New York get stuck. We will list few of the causes to stuck roller doors bellow. Please keep on mind that this is not a complete list of causes, since the reasons for a stuck roller door malfunction are many, and it is impossible to list all of them.
There is no electric power to opener: Sometime the roller door operator doesn’t receive electricity power due to electric malfunction, and as we all know, a roller door operator cannot work if it doesn’t receive electricity. If this is the reason your roller gate is stuck, you will need to call a nearby electrician to come and check the electricity connection to your roller door. Electricity malfunctions for roller door might occur due to different causes, and they are not uncommon. In the meantime, some roller doors in New York can be operated manually until the electrician will come and fix the issue. Using a chain system, or a push-to-open roller door.
My roller door is stuck, and refuse to move: This is a common malfunction, which the techs of Doctor Gate are dealing with almost on a daily base when we fix and service stuck roller doors. It is hard to explain what the specific cause is why your roller door in New York is stuck and refuse to open or close, since we need to physically check the gate, and locate the malfunction. Using force to make the roller door work is not the right way to solve the malfunction, and if you will insist and try to force a roller door to move, you can easily break other parts, or the gate can crush and create damage to the property or even hurt you. The right thing to do will get in touch with a roller door installer to come and fix the malfunction for you.

My roller door is out of its tracks. First we would like to make it clear that if your roll up door in New York went off tracks, there is a reason why it happened, roller doors – as long as they were properly installed – don’t just go off trucks for no reason. A roll up door, which operate smoothly, just like every roller door in New York should commercial or residential, is not supposed to go off tracks for no reason. If your roll up door went off tracks, it may be due to many reasons.

Fixing a roller door which went off tracks is not something that you should try and repair by do it yourself, even if it may seem simple to just force the roller door back into tracks. Fixing a roll gate which went out of its tracks can be a complicated and dangerous work, and sometime involve certain parts like new slats or new parts that you cannot find at a typical location like Home Depot.
Doctor Gate offer same day repair for out of tracks roll up doors and roller doors. We have experts who specialize in all types of roller doors and roller gates repairs, and they can service your busted roller door even today.
The motor can’t open up the roller door: While it might seem to you that the roller door opener cannot open the gate, you might assume that there is something wrong with the opener. But you should know that not every time that a roller door opener cannot open up the gate, it is not necessarily indicate that there is something wrong with the opener. Often the malfunction lay in the roller door and its mechanism itself, such as busted or weak spring that prevent the motor from operating the roller door. The exact reason can only be determined by inspecting the roller door, and the door’s opener, by a qualified roller door technician, who has the tools as well as the knowledge to fix the problem.

Busted roller Steel Door Spring New York

When the spring of a roller door in is busted, there are 2 ways to deal with the problem: The right way is to hire a local roller door expert to replace the spring, and the roller door will work smoothly and safely for many years just the way it worked before. The second way to deal with a busted roller door, which we consider only as temporary solution, will be to weld and repair the broken spring (Not always possible!). And here might be the right moment to declare something extremely important: Just like the overhead roller doors in New York, or roller gate repair, using a roller gate when the spring is broken (Or any type of malfunction for that matter) is extremely dangerous. Hire a local roller doors vendor to deal with the problem and to make sure that the door is safe for use again.
Even if it is a roller door which is operated by an electric operator, what makes it easy to open up the roller door and close it gently, is not the operator, but the spring that balance and help the roller door work. When the spring break, the operator need to replace the force that the spring provide in opening the roller door, and this is something dangerous. It can be a busted torsion roller door in New York, or private home overhead roller door, when the spring is busted or lose, the roller door is off tracks, or anything else that prevent the roller door from working smoothly and safely, and it should not be used before it is serviced by a qualified technician.

What to do when roller door’s spring break?

Before anything else, you need to make sure that the spring is really busted, and that this is the reason that prevent the door from working properly, and that indeed it is the cause the roller door is stuck or it is hard to open it up. In case the spring is damaged, you will need to hire a local vendor in New York who specialize in commercial roller doors. One of the vendors who offer same day service in New York is Doctor Gate, who offer emergency roller Steel Gates services in New York City. From private home roller door repair, to industrial roller doors, Doctor Gate are here for you.

Where can I buy a new roller door spring?

The springs of the roller doors is not something you can just go to the nearby home-depot or nearby hardware store and buy one. Each roller door in New York require its own size of spring and each roller door spring is custom made, determined by the size and the weight of the roller door. It can be torsion spring or push up spring with drums, the springs are created for a specific roller door, and rarely fit a different roller door! The spring which will fit a roller gate in Brooklyn, probably won’t be the right spring for a roller gate in Staten Island. A qualified roller door technician have the ability to measure the roller door in a way that will make sure that the right spring will be manufactured for the gate.
Doctor Gate will not sell springs for commercial roller doors! We will not be responsible for a roller door owner who decided that he can repair the spring or replace it by do it yourself. In the event of a busted commercial rollup gate spring, we recommend you to get in touch with a local gate vendor in New York to come and supply you with a new spring, and that will also do a professional replacement job.

Roller door Maintenance NYC

From the knowledge we acquired in the roller doors and roller gates services in NYC, there is one thing that always stand out, and that we would like to share with you: That thing is Maintenance. You may own a roller door in Queens, a roller door in White Plains they all roller doors and roller gates have one thing in common: They all need to be maintained, lubed and greased in order to make sure they will continue to operate for many years and won’t require repairs and service.

Who need roller door maintenance?

The short answer will be EVERY ROLLER DOOR need to be greased and maintained. The long answer will require us to explain to you why it is important to perform maintenance, greasing and roller gate tune up before it break and get jammed, and you will need a vendor who fix roller doors in New York.
While reading our post, you probably wonder: Why do I need to grease the roller door, if my roller door is working pin a perfect way? We would like to replay by taking an example from a different industry – The vehicles industry. The same way that you will not ignore the need of your vehicle for oil changing, smog check and tune up, even if it is a new vehicle, and even if the vehicle is driving perfectly, so does the roller doors. And it doesn’t matter if it is a roller door near Brooklyn, or a roller door in Rockland County, every roller door need to be maintained, greased or lubricated. And when you think about the weather conditions in the East Coast, and how unfriendly they are to the parts of the roller door, you can easily figure how important it is to perform on time maintenance and grease the roller door few times a year.

My gate is stuck, do I need to grease it?

Unfortunately, the roller door maintenance a preventing service and not a repair.  So if your roller door is already busted, stuck or off the tracks, it is probably too late for maintenance, which still need to be performed, but only once a roller door installer will inspect and repair it, and make sure it is safe for use again.
If there is a malfunction with your roller door that prevent the roller door from working properly, no amount of grease will change it. You will have to use a repairman prior to greasing the roller door. So if your roller door is stuck, contact a roller gate repairman to come and fix the problem.

Tips for automated roller doors in New York

We gathered some tips and DIY tips that can help troubleshoot motor driven roller door. It is written based on many years of servicing motor driven roller doors in and near New York City. The information we bring here - as the information we share with you – cannot replace the consolation of a qualified roller door service provider. The experts of Doctor Gate service all types of roller doors. It can be a roller shutter repair in Bronx, or a commercial roller door in Queens. Any time, any day, one of the experts of Doctor Gate can be there for you.

• If the roller gate does not operate properly when it being used manually (Using the chain or push up roller door), hire a local roller door specialist to fix the roller door before installing a motor and automate it. Installing new operator will not make the roller gate magically work. If the spring is snapped, or if it has been a while since someone inspected and tuned the roller door, you will need to take care of that first. You have to make sure that the roll down gate can operate normally when it is in manual mode, whether with a chin system or if it is a push up roller door. If it shows any signs of irregularity, if feel like the roller door/gate is too heavy to open, if it makes loud noises, or if there are damaged components, these malfunctions are not going to disappear when you install the new operator. Take care of any issue before setting up a new roller door operator.

• It is not recommended to try to save money by installing the cheapest opener in the market! Using the wrong roller door opener is simply a waste of your money, and can even be dangerous. Never use a roller door opener which is not specified by the manufacturer of the roller door! Trying to save money by using the wrong motor usually end with spending much more money on services. When you invest in top quality roll down gate opener you might be investing more money at the present, but you will be saving money in the future when you will have a perfectly operating automated roller gate that will serve you perfectly for many years.

• Avoid do-it- yourself DIY rollers doors and roller gates services! Don’t try to install the roller door opener yourself or by hiring a nearby handyman which is not qualified to deal with commercial rollup doors. If you will try to save money by hiring someone who isn’t qualified for the task, you might lose money and you will put yourself and others who use the roller door at risk.

• Know all the possible solutions and latest updates. There are solutions for roller doors that you never even heard of, and that can make your life easier whether it is a private home or a business. For example, Liftmaster openers can be operated from cellphones these days. And we predict that soon all of the openers will have that ability. So know your options, and by hiring a real roller door vendor in New York, you make sure that you will get the best service, and the latest develops in the industry of roller doors operators.

 

 

Roller Door Services New York City

Call Doctor Gate: 917-338-4257